Posted on June 6, 2022
Floor Sanding and Polishing Guide
Before starting a floor sanding and polishing project, you must first remove any old paint or varnish that has adhered to the wood. Use a paint scraper or heat gun to remove the old coating. If there are small scratches or dents, fill them with wood filler or sand with medium-grit sandpaper in the direction of the wood grain. Once the floor is clean, apply a coat of high-density polyurethane and allow 24 hours to dry. After the coating process, sweep the floor regularly to keep dust from collecting.
The next step in the floor sanding and polishing Adelaide process involves using a sander. This machine has a rotating disc with a small cylinder above it. This machine sands the floor. Its primary purpose is to smooth out the wood’s roughness and provide a mechanical key for the next coat of finish. Another type of sander is a hand-guided edger. It features a rotating disc and is easy to manoeuvre. The machine also allows the operator to use a technique known as “clocking” to minimize the visual impact of scratches.
Buffing can be done at home, but it cannot correct the damage to wood. Although it can be a good choice for repairs, it cannot repair damage caused by scratches or discolouration. A sanding job will remove the scratches and dents in the wood. It is more time-consuming than a buffing job, but it can add value to your home and improve its appearance. You should also consider the amount of dust involved when doing the job yourself.
When sanding the floor, you should start using the lowest grit on the side with an open front. You can move up to 120 grit to make the floor look smoother. To ensure you avoid scarring the wood, switch to the next grit. If the floor is too rough, you may need to start with the lowest grit and work your way to the top.
Before the floor sanding and polishing process, make sure that there are no obstacles. Before hiring a professional, ensure easy access to the room and open space for parking the vehicle outside. Also, make sure that there is ample power and lighting for the contractors. If the contractor is painting the walls, you should ensure that they have electricity in their name. Then, once the floor sanding and polishing process is over, you can paint over the walls, but you should not paint the skirting boards.
Professional floor sanding contractors need to work on a strict schedule. You should consult with the contractors on the best time to perform the sanding process. Ideally, you should have the entire work completed before the sanding process begins. You should also remove any furniture or floor coverings before the sanding and polishing process begins. This will prevent interruptions to the contractors and ensure that everything goes smoothly.
Before the sanding process can start, you should prepare the room by moving any furniture that can cause the dust to rise. If the sanding process involves sanding, you should protect baseboards and joints with plastic or bags. Moreover, you should also remove curtains to prevent interruptions during the work process. Taking care of curtains is essential as the sanding process can easily damage them.
If you plan to sand your wooden floor, you must clear all furniture from the room, including inside and outside of built-in cupboards. The wood floor tends to expand and contract during the summer season, and humid weather will make the flooring warp. Harsh cleaning agents can also damage bare timber wood, and harsh detergents will dull the polishing. Eventually, you will have to spend more on the floor polishing process.
Wooden floors need sanding and polishing every 10-15 years, but if you take care of them, they can last for as long as ten years before refinishing. Floor sanding and polishing is also an excellent way to give a great home feature new life. By doing it yourself, you can save money and time. In addition to sanding and polishing your hardwood floors, you’ll be able to save yourself a lot of hassle and money.
While floor sanding and polishing are relatively easy to do on your own, they can be time-consuming and a daunting task. A professional can also provide you with a range of services and products perfect for different types of floors. The floor sander can sand your floors at home or in a professional setting, depending on your timber type. If you have a wooden floor, sanding and polishing can be a great way to add value to your property.